Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW11] Axiom 9 chart plotter compatibility with st60 and st6002
07-07-19, 08:02 AM (This post was last modified: 07-09-19 06:41 AM by Louise - Raymarine - Moderator.)
Post: #1
[LW11] Axiom 9 chart plotter compatibility with st60 and st6002
Hallo,
Can I have information abut compatibility with the axiom 9 chart plotter with my actual instruments, st6002 autopilot and st60+ tridata and st60+ wind instrument?
Thank you .
Antonio
Find all posts by this user
Quote this message in a reply
07-11-19, 09:41 AM
Post: #2
RE: [LW11] Axiom 9 chart plotter compatibility with st60 and st6002
Dear toniocask,

Thank you for your post.

You can network the old seatalk system with the new STng system with our convertor (part no E22158). It is called the ST1 to STng convertor and the manual is viewable here.

You will not be able to control your autopilot from the Axiom when these 2 systems are networked together, you can still send waypoint and route data to the pilot just lacking the feature of pilot control.

All of your instrument data will be shared on to the STng network.

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us