The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Send position to nmea0183 vhf
07-16-19, 09:07 PM (This post was last modified: 07-22-19 01:31 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Send position to nmea0183 vhf
I have a fully working seatalkng network with an axiom 9 mfd. I inserted a seatalk1 / seatalkng convertor near the vhf and used a bare end spur cable to connect the vhf “listen” or RX connection. When I connect the spur to the converter, the diagnostic light goes from indicating ‘healthy’ to “on” indicating low voltage.

What is the correct way to make this interface work?

—Kevin
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Send position to nmea0183 vhf - Ktisdall - 07-16-19 09:07 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)