Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Wind Speed Errors
08-11-19, 07:03 PM (This post was last modified: 08-20-19 10:45 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] Wind Speed Errors
Chuck,
I tried this today. It didn't seem to do anything. I cycled the power and nothing. Then I disconnected the jumper I used to connect them and went sailing. Several times the AWA jumped and AWS jumped around with numbers raging from 0 to 100. Then it would freeze for a while, then jump again. I hadn't seen this before.
I rechecked the voltages.
Red to shield was 8.4V
Green wire to shield was bouncing around 5V
Yellow to shield was 3.2V.
Blue to shield was still high, at 7.5V.

Anything else I should check?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Wind Speed Errors - SVSunDog - 07-26-19, 08:38 AM
RE: [CA11] Wind Speed Errors - SVSunDog - 08-11-19 07:03 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)