The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / Unable to Select Data Sources with J2K100

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Unable to Select Data Sources with J2K100
05-25-16, 06:59 PM
Post: #1
jeokeefe@gmail.com Offline
Junior Member
**
 		Posts: 39
Joined: Mar 2016
Reputation: 0
Unable to Select Data Sources with J2K100
I installed a Maretron J2K100 J1939 to NMEA 2000 gateway for use with my generator. I connected it to the SeaTalk(ng) network via the raymarine SeaTalk(ng) to NMEA2000 adapter. The device functions properly on the network, however when connected, all of the Raymarine devices (p70r, e127, i70) are unable to select data source. It returns a message stating that it was unable to select data source and to refer to the manual.

When I unplug the J2K100 the problem goes away. Any idea what the issue could be?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Unable to Select Data Sources with J2K100 - jeokeefe@gmail.com - 05-25-16 06:59 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication