Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Anchor camera
05-25-16, 07:38 PM (This post was last modified: 05-26-16 07:13 AM by Chuck - Raymarine - Moderator.)
Post: #1
Anchor camera
Dear Forum members,

I Would like to instal a camera to check if may anchor is totally folded. I have an A98 MDF. Could someone give-me a tip what would be the best an ship solution for this.

Thanks in advance.

best

João
Find all posts by this user
Quote this message in a reply
05-26-16, 07:20 AM
Post: #2
RE: Anchor camera
Welcome to the Raymarine Forum João,

The a9x MFDs are compatible with cameras having either a NTSC/PAL video interface (ex. CAM100) or Ethernet interface (ex. CAM210, CAM220, and CAM200IP). You may want to consider the CAM220 for your application.
Visit this user's website Find all posts by this user
Quote this message in a reply
06-23-16, 07:27 PM (This post was last modified: 06-24-16 08:01 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: Anchor camera
Dear chuck,

i Tried use a camera with a BNc conector, but there is only one conector in MFD for GA 150. how I connect the BNc to MFD? Do I need something else.

Best
Find all posts by this user
Quote this message in a reply
06-24-16, 08:04 AM
Post: #4
RE: Anchor camera
João,

The GA150 actually connects to the MFD's TNC socket. The MFD's Power/NMEA 0183/Video Input Cable features a BNC connector to support interfacing camera producing a NTSC/PAL analog video signal.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us