Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Fishfinder tutorial
08-25-19, 11:53 PM
Post: #4
RE: [TG11] Fishfinder tutorial
Some of the pros I've spoken to have said the opposite, that monotonic (non-Chirp) sounders are more likely to scare fish than Chirp ones. A traditional monotonic sounder will make a sounder that is short and sharp and is something certainly that a person would recognise as being definitely artificial, whereas a chirp sounder's ping will be longer in duration but will change both in volume and frequency throughout the ping and would therefore likely sound more natural or biological to a human (the word Chirp long-predates fishfinders and is an analogy to a bird's call.) I've no idea what would scare a fish however.

Rather than changing technology, the simplest thing you could do to reduce a possible effect there would be to reduce power output, but on CP450C you can also use non-Chirp mode as well (50kHz, 200kHz are non-Chirp equivalents of Low Chirp and High Chirp.) Personally I wouldn't turn off Chirp, but you could certainly experiment with the effect on bait.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[TG11] Fishfinder tutorial - BernieK - 08-11-19, 12:10 AM
RE: [TG11] Fishfinder tutorial - Tom - Raymarine - Moderator - 08-25-19 11:53 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)