European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
Raymarine forum
/
Raymarine Forums
/
Multifunction Displays 
/
[DG] [DG11] C80 - no depth on chartploter but does show on fishfinder
/
[DG] [DG11] C80 - no depth on chartploter but does show on fishfinder
|
[DG] [DG11] C80 - no depth on chartploter but does show on fishfinder
|
|
08-27-19, 07:26 AM
Post: #2
|
|||
|
|||
|
RE: [DG11] C80 - no depth on chartploter but does show on fishfinder
Hi CKroll
The depth display shown in the databox is derived from the SeaTalk network and will only be populated if there is SeaTalk Depth data on the network. This is different to the depth displayed by the sonar which is sourced from the DSM. Normally if there is no depth available on SeaTalk, then the c80 will source it from the DSM. What depth sources do you have onboard? If SeaTalk, check the SeaTalk depth display is operating. If you are sourcing depth from NMEA, resetting the C80 may have changed the baud rate on the NMEA input and so you have lost the NMEA incoming depth. regards Derek |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
[DG11] C80 - no depth on chartploter but does show on fishfinder - ckroll - 08-26-19, 02:16 PM
RE: [DG11] C80 - no depth on chartploter but does show on fishfinder - Derek - Raymarine - Moderator - 08-27-19 07:26 AM
RE: [DG11] C80 - no depth on chartploter but does show on fishfinder - ckroll - 08-27-19, 11:47 AM
|
User(s) browsing this thread: 1 Guest(s)