[JH] [jh11] i70 wind not displaying

[John - Raymarine - Moderator]

Michael,

Thank you for reaching out to us on the forum.

Take a look at your Diagnostics and identify if the ITC 5 is being recognized.

On the ITC 5

Menu>Set-up>Diagnostics>About System>Continue>Find ITC-5 on the list

If the ITC 5 is displaying then you will want to locate that device and identify what the LED's are doing. You can find the indications here ITC 5 Manual

You can further reference troubleshooting on your anemometer. Please click here to view a FAQ addressing this subject.

Best Regards
John