Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] I50 and I60 compatible with my present hardware?

Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] I50 and I60 compatible with my present hardware?
09-26-19, 02:23 PM
Post: #8
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] I50 and I60 compatible with my present hardware?
udo,

I can't account for the difference specified other than to suggest that one of them may have been specified with a Right Angle SeaTalkng Spur Cable. The mounting depth of both the i60 Wind and i70 (measured from the flange to the top of the SeaTalkng spur socket locking ring) is approximately 32mm. For the i70S, this measurement is slightly smaller at approximately 30mm. The A06081 SeaTalkng Right Angle Spur
- STng Straight Plug (1m) adds approximately 22mm to the above listed mounting depths as would the A06042 / 15.7in (0.4mm) SeaTalkng Right Angle Spur
- SeaTalkng Right Angle Spur. The latter may be used to daisy chain the i70S MFID to the i60 instrument should you elect to daisy chain these devices together.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] I50 and I60 compatible with my present hardware? - Chuck - Raymarine - Moderator - 09-26-19 02:23 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication