Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] I50 and I60 compatible with my present hardware?

Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] I50 and I60 compatible with my present hardware?
09-28-19, 09:14 AM (This post was last modified: 10-01-19 11:07 AM by Chuck - Raymarine - Moderator.)
Post: #13
udo Offline
Junior Member
**
 		Posts: 8
Joined: Jul 2019
Reputation: 0
RE: [CA11] I50 and I60 compatible with my present hardware?
You write here: ''at this time, it is recommended that an ITC-5 and that the transducers specified above be installed if an i70S MFID will be installed.

Do you mean: the Smart DST800 and Smart DT800

or:

M78713-PZ P319 Low Profile Through Hull Plastic Depth Transducer 14m Cable
- E26031 ST800/P120 Speed/Temperature Low Profile Retractable Through Hull Transducer - 13.7m Cable
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] I50 and I60 compatible with my present hardware? - udo - 09-28-19 09:14 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication