Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] I50 and I60 compatible with my present hardware?

Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] I50 and I60 compatible with my present hardware?
10-01-19, 12:09 PM (This post was last modified: 10-01-19 01:46 PM by Chuck - Raymarine - Moderator.)
Post: #14
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] I50 and I60 compatible with my present hardware?
udo,

I was recommending the iTC-5 and the following transducers:
- M78713-PZ P319 Low Profile Through Hull Plastic Depth Transducer 14m Cable
- E26031 ST800/P120 Speed/Temperature Low Profile Retractable Through Hull Transducer - 13.7m Cable

Please refer to my earlier post within this thread stating that we have received recent reports of reduced levels of depth performance from those using the Smart DST800 and Smart DT800, at this time, it would be recommended at this time that an iTC-5 and that the transducers specified above be installed if an i70S MFID will be installed.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] I50 and I60 compatible with my present hardware? - Chuck - Raymarine - Moderator - 10-01-19 12:09 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication