Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Upgrading my A70D
09-27-19, 04:32 PM (This post was last modified: 10-01-19 02:47 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Upgrading my A70D
I have the following equipment on the sailboat that I recently purchased:
A70D Chartplotter
ST40 Wind Instrument
S1 Wheel Pilot-Smart Pilot Series
ST6002 Smart Pilot Controller
DSM25 Sounder module

I would like to update the A70 to a plotter with marina to marina capability and was wondering if that is possible without replacing the auto pilot and wind instrument? If yes could you recommend an updated plotter?

Thank you for your help.
Find all posts by this user
Quote this message in a reply
10-01-19, 03:12 PM
Post: #2
RE: [CA11] Upgrading my A70D
Welcome to the Raymarine Forum Brent,

Please note that a DSM25 does not have the capability to be interfaced to the items specified. It may be possible that a fishfinder transducer which had been interfaced to the DSM25 was disconnected from the DSM25 and is currently interfaced to the A70D to support its fishfinder features. There is a good chance that the ST40 instrument and autopilot may be interfaced to a currently manufactured MFD and that the transducer which is presently interfaced to the A70D, may be adapted to be mated to a currently manufactured MFD. ST40 instruments and your autopilot components may be adapted to be used with Raymarine's currently manufactured MFDs.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us