[CA11] Power when interfacing seatalkng to NMEA2000

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Power when interfacing seatalkng to NMEA2000

10-03-19, 03:02 PM (This post was last modified: 10-03-19 04:05 PM by Chuck - Raymarine - Moderator.)

Post: #1

Rom

Junior Member

Posts: 36
Joined: Nov 2018
Reputation: 0

[CA11] Power when interfacing seatalkng to NMEA2000

Hi all,

This topic has been discussed in other threads but I'm just a bit curious on one point.

I've seen somewhere that when interfacing both, a seatalkng network to a NMEA2000 that only one power source should be added to the system ( now comprised of both the seatalkng and NMEA2000) as the adapter cable being used (Seatalkng spur to devicenet adaptor) is able to carry power across it. Is this correct?

Thanks,
Rom

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Power when interfacing seatalkng to NMEA2000 - Rom - 10-03-19 03:02 PM

RE: [CA11] Power when interfacing seatalkng to NMEA2000 - Chuck - Raymarine - Moderator - 10-03-19, 04:10 PM

RE: [CA11] Power when interfacing seatalkng to NMEA2000 - Rom - 10-04-19, 07:41 AM

RE: [CA11] Power when interfacing seatalkng to NMEA2000 - Chuck - Raymarine - Moderator - 10-04-19, 07:57 AM

RE: [CA11] Power when interfacing seatalkng to NMEA2000 - Rom - 10-10-19, 10:11 AM

RE: [CA11] Power when interfacing seatalkng to NMEA2000 - Chuck - Raymarine - Moderator - 10-10-19, 10:42 AM

User(s) browsing this thread: 1 Guest(s)