Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] AIS 650
10-04-19, 07:43 AM (This post was last modified: 10-04-19 10:06 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] AIS 650
I install a new AIS 650 , connected with ST (ng) cable to a C 125, AIS 650 is ok, green light, but in the chartplotter in the screen show a "NO AIS" sign, seems that the plotter don´t comunicate with the AIS, where is the problem ??
Thanks for the help with this issues.

Regards
Find all posts by this user
Quote this message in a reply
10-04-19, 10:09 AM
Post: #2
RE: [CA11] AIS 650
Welcome to the Raymarine Forum bigua,

SeaTalkng / NMEA 2000 devices are not designed to be interfaced to one another via a single cable. Instead, such devices are designed to be interfaced as individual spurs to a powered and properly terminated SeaTalkng / NMEA 2000 backbone. Please click here to view a FAQ addressing how one may construct a simple backbone from SeaTalkng networking components to which the MFD and AIS650 may each be interfaced via an appropriate length of SeaTalkng Spur Cable.
Visit this user's website Find all posts by this user
Quote this message in a reply
01-13-20, 12:11 PM
Post: #3
RE: [CA11] AIS 650
Hi Chuck, what if I conect both using the cables in the C 125 and the AIS ( NMEA 0183) ??
I know is not the same that conecting using Seatalk ....but, for th emoment that´s the only connection I need.
Thanks for your support
Find all posts by this user
Quote this message in a reply
01-13-20, 12:43 PM
Post: #4
RE: [CA11] AIS 650
bigua,

Q. what if I conect both using the cables in the C 125 and the AIS ( NMEA 0183) ?
A. It is indeed possible to interface the MFD's NMEA 0183 Port 1 leads to the corresponding 38400 BAUD NMEA 0183 leads of the AIS650 to support communications between these products. After doing so, the MFD's NMEA 0183 Port 1 will need to be configured for 38400 BAUD NMEA 0183 communications (AIS 38400) and the AIS objects layer will need to be configured ON within the Chart application page/pane being viewed.
Visit this user's website Find all posts by this user
Quote this message in a reply
01-13-20, 01:00 PM
Post: #5
RE: [CA11] AIS 650
Thanks Chuck, I understand that is better than NMEA use the seatalk way....It´s correct ??
Find all posts by this user
Quote this message in a reply
01-13-20, 01:17 PM
Post: #6
RE: [CA11] AIS 650
bigua,

Q. I understand that is better than NMEA use the seatalk way....It´s correct ??
A. From the standpoint of having an of the system's MFDs display AIS data and to control the Silent Mode state of an AIS700/650/500, either method is equally acceptable. Alternatively, interfacing an AIS700/650/500 via SeaTalkng / NMEA 2000 communications may permit AIS data to be available to other devices within the system (ex. i70/i70S MFIDs, NMEA 2000 to WiFi interfaces, etc.) and determine certain diagnostics of the an AIS700/650/500 (ex. software level, etc.).
Visit this user's website Find all posts by this user
Quote this message in a reply
01-13-20, 01:28 PM
Post: #7
RE: [CA11] AIS 650
perfectly clear !!
Thank you Chuck for the outstanding support !!
Find all posts by this user
Quote this message in a reply
01-13-20, 01:38 PM
Post: #8
RE: [CA11] AIS 650
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us