Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] A57 seatalk
10-07-19, 09:27 AM (This post was last modified: 10-07-19 03:01 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] A57 seatalk
Hi,
I've just bought a refurbed A57D. What is the best way to get it to talk to the st60 tridata and st4000 mk11? My old standard horizon chart plotter was already talking to the triadata and autopilot via mnea but would seatalk be easier? I don't have the leads or pinouts so connection will be a bit hit-and-miss.
Find all posts by this user
Quote this message in a reply
10-07-19, 03:04 PM
Post: #2
RE: [CA11] A57 seatalk
Welcome to the Raymarine Forum hugoman42,

Should the autopilot have been a ST4000+/ST5000+, then it would have been recommended that a SeaTalk to SeaTalkng Converter Kit be used for this purpose. However, as ST4000/ST5000 are not supported for use with the SeaTalk to SeaTalkng Converter Kit, it would be recommended that the A57D likewise be interfaced via NMEA 0183 to the ST4000.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us