Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] M232 display on MFD
10-24-19, 10:39 AM (This post was last modified: 10-24-19 11:56 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] M232 display on MFD
I currently have an M232 connected to an Axiom Pro 12" display. Several of the manuals display the field of view displayed on the MFD when the camera is on. I don't currently see that field of view displayed on my Navionics charts? Can I get that to display on Navionics chart window?
Find all posts by this user
Quote this message in a reply
10-24-19, 11:57 AM
Post: #2
RE: [CA11] M232 display on MFD
Welcome back to the Raymarine Forum Chief,

Are you seeking to overlay the Chart application with a colored sector indicating the FOV of the thermal camera?
Visit this user's website Find all posts by this user
Quote this message in a reply
10-27-19, 07:35 PM
Post: #3
RE: [CA11] M232 display on MFD
Yes, exactly.

John
Find all posts by this user
Quote this message in a reply
10-28-19, 08:07 AM
Post: #4
RE: [CA11] M232 display on MFD
John,

Within MFDs running the latest available LH3 software, the camera's FOV may be graphically layered within the chart application via the command sequence MENU->SETTINGS->LAYERS->FOV. However, the FOV layer option will not be accessible unless the system includes an AR200 Augmented Reality Sensor.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us