[CA] [CA11] E120 Widescreen saying No SeatalkNG devices

[DevoDave]

I just upgraded an ST-60/S1G setup to a i70/Evolution and have an E120 Widescreen MFD.

Everything is working fine and the software on all components has been upgraded to the most recent. This was performed via the E120W which saw the new SeatalkNG devices to upgrade them.

Jumping into diagnostics on the i70s and p70Rs and checking out the network, all SeatalkNG devices are listed including the E120W as well as the ITC-5.

However the E120W (and a C90W I tried as well) report no SeatalkNG devices. All the data from the ITC-5 and integration with the Evolution autopilot works on the MFD.

(In testing I reduced the network down to just a 5 way block with terminators and the MFD, a power spur, and the i70s. Same result. I also checked the terminators and they are both 120ohms and testing the block with the MFD and i70s and one terminator and saw 120ohms.)

I am struggling to know where to go from here. Any suggestions?