[CA] [CA11] Radar M92650-s power supply plug

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Etienne,

Please see the drawing below of the analog radome cable which will be used to interface and power the radome.



Please see the drawing below showing how the radar cable will be connected to the core within the analog 2kW and 4kW radomes (i.e. RD218 and RD424) which followed your 4D 4kW Radome. Within the 2D and 4D radomes, there is no need to remove the core's power/interface cover plate to access the radome's power terminals and communication/video interface socket, as the power terminals and communications/video socket are located on the outside of the radome's core. For the RD218 and RD424 radomes, the power/interface cover plate (held in place with phillips head screws) which must be removed to connect the radar cable will feature a bulge through which the radar cable will pass The radar cable's shield will be grounded to the radar core when the connections cover plate afterwards screwed back in place.