[LW] [LW11] I70s and ITC-5 wind problem

[Louise - Raymarine - Moderator]

Dear fozzy83,

Thank you for your post.

What software are you running on the iTC-5?

Is your STng backbone installed correctly and terminated with a terminator at each end?

Is there a healthy 12v power supply going to the iTC-5? The wind transducer is power from the iTC-5 and if there is not sufficient power the instruments will not show any data.

There is also a test you can perform using a voltmeter to ensure the transducer is functioning, further information is available here.

What else is on your network? Can you provide a system installation diagram?

Are you using a triducer for speed and depth?

Many Thanks
Louise