[LW] [LW11] I70s and ITC-5 wind problem

[Louise - Raymarine - Moderator]

Dear fozzy83,

Thank you for your post.

When testing the wind transducer did you disconnect the cables apart from red and screen, then measure the volts? Did the readings fall within the expected parameters? Can you provide these figures to me.

With just the red and screen connected are you getting the drop to 1-2 volts? This sounds like there is maybe a short in the cable or a fault with the wind transducer. Check the cabling and connections for any breaks in the cabling, joins in the cable that may have a short or signs of corrosion.

How have you installed the iTC-5 to the network? Have you incorporated it within the backbone?

If you go in to the P70 menu - setup - diagnostics - about system, you will be able to view all products on the network and their software revision. The iTC-5 needs to be on v1.12.

Have you an installation diagram you can send?

Many Thanks
Louise