+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] converting fsh to Gps (/showthread.php?tid=10167)
[CA11] converting fsh to Gps - jimk - 12-20-19 12:06 PM
converting fsh to Gpx for my E140W
RE: [CA11] converting fsh to Gps - Chuck - Raymarine - Moderator - 12-20-19 01:59 PM
Welcome to the Raymarine Forum Jim,
A GPX file containing 2342 waypoints and 1 track has been e-mailed to you. This data was retrieved from your archive.fsh file by a MFD running LightHouse II v13.37 software. The MFD was then commanded to exported by the MFD to the attached GPX file. It should be noted that the waypoint names and/or comments within your archive.fsh file and the subsequently produced GPX file … most notably with regard to the inclusion of apostrophes within the waypoint names. As indicated, a FAQ has been written address the constraints for waypoint names and comments. This FAQ may be found here. To prevent any future issues related to these constraints when using a Raymarine MFD or third party chartplotting product / software, it is recommended that the naming constraints within the referenced FAQ be heeded and that the names of your waypoints be changed to comply with these constraints