Raymarine forum
[CA] [CA11] EV150 connection to Seastar - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: [CA] [CA11] EV150 connection to Seastar (/showthread.php?tid=10213)

[CA11] EV150 connection to Seastar - michaelcorwin - 12-31-19 04:20 PM

Raymarine support,

I'm connecting the hydraulic pump for my EV150 autopilot to my Seastar system with power steering. My pump states the fittings on it are BSP (I assume BSPP) and my Seastar system hoses have 3/8″ compression fittings which utilize a 9/16″-24 extra fine thread. Does Raymarine make an appropriate adapter? If not how can I get my system working?

Thank you,
Mike Corwin

RE: [CA11] EV150 connection to Seastar - Chuck - Raymarine - Moderator - 01-02-20 10:10 AM

Welcome to the Raymarine Forum Mike,

You will need to obtain hydraulic hoses from Seastar. These will feature NPT threads which may in turn be adapted to BSB threads via Raymarine's M81187 RAYPILOT BSP TO NPT ADAPTORS.