Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] EV150 connection to Seastar
12-31-19, 04:20 PM (This post was last modified: 01-02-20 10:06 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] EV150 connection to Seastar
Raymarine support,

I'm connecting the hydraulic pump for my EV150 autopilot to my Seastar system with power steering. My pump states the fittings on it are BSP (I assume BSPP) and my Seastar system hoses have 3/8″ compression fittings which utilize a 9/16″-24 extra fine thread. Does Raymarine make an appropriate adapter? If not how can I get my system working?

Thank you,
Mike Corwin
Find all posts by this user
Quote this message in a reply
01-02-20, 10:10 AM
Post: #2
RE: [CA11] EV150 connection to Seastar
Welcome to the Raymarine Forum Mike,

You will need to obtain hydraulic hoses from Seastar. These will feature NPT threads which may in turn be adapted to BSB threads via Raymarine's M81187 RAYPILOT BSP TO NPT ADAPTORS.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)