+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [TG] Axiom 9 connecting to satellites (/showthread.php?tid=10258)
Axiom 9 connecting to satellites - Clauden - 01-07-20 04:30 PM
Hi,
I bought a brand new Axiom 9 E70366-00NAG. I installed it at home very close to a window.
The problem with the Axiom, it takes 5,10 minutes to reach the satellites every time I turn it on. I cannot imagine to get the same problem when I will be on the water???
Only the Axiom is connected, no other GPS.
I have my old Standard Horizon CP180I Chart Plotter and in a minute, he connects with the satellites. It ils set just beside the Axiom.???
Do you have some Hints???
Thank you,
Claude
RE: Axiom 9 connecting to satellites - Tom - Raymarine - Moderator - 01-07-20 06:16 PM
Hello Clauden,
Have a read through this FAQ and then post back what you see in your Satellite status page, and I'm sure we can get to the bottom of it.
Regards,
Tom