Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] Axiom 9 connecting to satellites
01-07-20, 04:30 PM (This post was last modified: 01-07-20 06:12 PM by Tom - Raymarine - Moderator.)
Post: #1
Axiom 9 connecting to satellites
Hi,
I bought a brand new Axiom 9 E70366-00NAG. I installed it at home very close to a window.
The problem with the Axiom, it takes 5,10 minutes to reach the satellites every time I turn it on. I cannot imagine to get the same problem when I will be on the water???
Only the Axiom is connected, no other GPS.

I have my old Standard Horizon CP180I Chart Plotter and in a minute, he connects with the satellites. It ils set just beside the Axiom.???

Do you have some Hints???

Thank you,

Claude
Find all posts by this user
Quote this message in a reply
01-07-20, 06:16 PM
Post: #2
RE: Axiom 9 connecting to satellites
Hello Clauden,

Have a read through this FAQ and then post back what you see in your Satellite status page, and I'm sure we can get to the bottom of it.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)