+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: [TG] [TG11] Linear Drive Type 2 Long vs Short (/showthread.php?tid=10952)
[TG11] Linear Drive Type 2 Long vs Short - TBV - 04-15-20 04:12 PM
Hi, I am about to replace my Type 2 Linear drive. My yacht, weighs about 16,000kg fully loaded with a long keel and huge rudder. I removed the old unit which was a Type 2 Short and purchased a Type 2 Long to replace it with due to the weight of our yacht and the fact that we sail ocean crossings often.
Reading the installation manual Figure 4 Drive Alignment indicates a tiller arm radius of 250mm for the Short and 355mm for the Long.
My tiller arm radius is only 255mm but with the weight of the yacht am I still okay to install the Type 2 Long with the 255mm tiller arm radius? Thanks.
RE: [TG11] Linear Drive Type 2 Long vs Short - Derek - Raymarine - Moderator - 04-17-20 05:19 AM
Hi Craig,
I believe I have just responded to your recent post? Apologies for the delay,
Regards
Derek