+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] Axiom MFD not responding to power on swipe (/showthread.php?tid=10962)
[CA11] Axiom MFD not responding to power on swipe - gmack7277 - 04-16-20 10:09 PM
Hello. Hope you are well during this crazy time.
In my system I have 2 Axiom 9 units networked together. I've had them installed for a little over a year and have had no problems until now. Both of the units are receiving power, however one will not "turn on" with a swipe. I've been on two trips now of it not working. Have turned power off to the unit and has not helped. Any suggestions?
Thank you,
Gary
RE: [CA11] Axiom MFD not responding to power on swipe - Chuck - Raymarine - Moderator - 04-20-20 01:30 PM
Welcome to the Raymarine Forum Gary,
Unfortunately, the only way to address the reported problem would be to have the MFD's Power Swipe serviced. Accordingly, it is recommended that the MFD be sent to Raymarine’s Product Repair Center to be bench checked / serviced.
RE: [CA11] Axiom MFD not responding to power on swipe - gmack7277 - 04-20-20 09:41 PM
Thank you. Does it need to go to a "Raymarine" or a local facility?
Thank you,
GAry
RE: [CA11] Axiom MFD not responding to power on swipe - Chuck - Raymarine - Moderator - 04-21-20 07:28 AM
Gary,
The MFD should be sent to Raymarine’s Product Repair Center to be bench checked / serviced. On Product Repair web page, you will find a button titled Book a Repair which will be used to start the process and generate a shipping label.