Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom MFD not responding to power on swipe
04-16-20, 10:09 PM (This post was last modified: 04-17-20 09:17 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Axiom MFD not responding to power on swipe
Hello. Hope you are well during this crazy time.

In my system I have 2 Axiom 9 units networked together. I've had them installed for a little over a year and have had no problems until now. Both of the units are receiving power, however one will not "turn on" with a swipe. I've been on two trips now of it not working. Have turned power off to the unit and has not helped. Any suggestions?

Thank you,
Gary
Find all posts by this user
Quote this message in a reply
04-20-20, 01:30 PM
Post: #2
RE: [CA11] Axiom MFD not responding to power on swipe
Welcome to the Raymarine Forum Gary,

Unfortunately, the only way to address the reported problem would be to have the MFD's Power Swipe serviced. Accordingly, it is recommended that the MFD be sent to Raymarine’s Product Repair Center to be bench checked / serviced.
Find all posts by this user
Quote this message in a reply
04-20-20, 09:41 PM
Post: #3
RE: [CA11] Axiom MFD not responding to power on swipe
Thank you. Does it need to go to a "Raymarine" or a local facility?

Thank you,
GAry
Find all posts by this user
Quote this message in a reply
04-21-20, 07:28 AM
Post: #4
RE: [CA11] Axiom MFD not responding to power on swipe
Gary,

The MFD should be sent to Raymarine’s Product Repair Center to be bench checked / serviced. On Product Repair web page, you will find a button titled Book a Repair which will be used to start the process and generate a shipping label.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)