Raymarine forum
[TG] ST-60 wind inst T/S - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Instruments (/forumdisplay.php?fid=117)
+--- Thread: [TG] ST-60 wind inst T/S (/showthread.php?tid=11134)



ST-60 wind inst T/S - Eheim - 05-03-20 06:51 PM

so I have a full ST60 package, wind, speed, depth. Wind cups were damaged. Cups replaced, instrument worked fine for a few days and went wacky. ST60 wind inst powers up but no data displayed (no needle movement). How can I T/S the wires coming down (what voltage should be on red etc) and how can I T/S the display assuming the information is making it through the wires.


RE: ST-60 wind inst T/S - Tom - Raymarine - Moderator - 05-07-20 09:55 PM

Hello Eheim,

There are voltage measurements for the windvane on this FAQ. I suspect you'll see incorrect voltages on either blue or green (the wind angle pair that the system uses to detect that the windvane is there.

Regards,
Tom