i60 Wind - No wind speed Readings - Printable Version +- Raymarine forum (http://forum.raymarine.com) +-- Forum: Raymarine Forums (/forumdisplay.php?fid=1) +--- Forum: Instruments (/forumdisplay.php?fid=117) +--- Thread: i60 Wind - No wind speed Readings (/showthread.php?tid=11318) |
i60 Wind - No wind speed Readings - nveater - 05-17-20 02:57 PM I have an i60 wind software version 1.05- wind speed has either stopped working or shows erratic numbers some of which might be correct- wind angle seems correct although it also has been acting intermittently. At the beginning of the season(2020) the unit appeared to be working- after reviewing this forum I took the following voltage readings From MHU to Junction Red 7.9 v Blue 3.9 v Green 4.9 v Yellow 2.9 v From Junction to unit Red 7.9 v Blue 3.2 v Green 4.8 v Yellow 2.6 v The boat was at the dock at the wind was somewhat gusty and swirly. I was unable to measure at instrument because I couldn't pry off bezel ( I could on other instruments- any tips) - I will continue trying- any preliminary thoughts Thanks RE: i60 Wind - No wind speed Readings - Chris - Raymarine - Moderator - 05-20-20 12:58 PM Hello nveater, Those readings are good so they would indicate the masthead and cable are good. I would suspect the ST60 or the spade terminal connections on the back of the unit to be the culprit here. Chris, |