+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: General Discussions (/forumdisplay.php?fid=2)
+--- Thread: [TG] [TG11] Engine Management - Engine setup wizard with non-Raymarine engine gateway (/showthread.php?tid=11507)
[TG11] Engine Management - Engine setup wizard with non-Raymarine engine gateway - gr8lkr - 05-29-20 06:47 PM
I have a Axiom with Lighthouse operating system. I also am using a Fox Gateway engine management system. The engine is a 1997 Mercruiser 5.7 EFI. During setup the operating system does not recognize the engine. Could this be because of the engine gateway?
RE: [TG11] Engine Management - Engine setup wizard with non-Raymarine engine gateway - Tom - Raymarine - Moderator - 06-09-20 10:33 PM
Hello gr8lkr,
The engine setup (Identify engines on LH3 software) is designed to set up the Raymarine ECI100 engine gateway and won't work with other gateways, however if the gateway/engines are correctly configured (in particular the Instance number) then there should be no setup required on the Raymarine MFD except to tell it how many engines there are, in Home > Setup > Boat Details.
Are you having problems with engine data? If so, what problems? That FAQ has some info about common issues.
Regards,
Tom