+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [TG] [TG11] New Axiom old auto pilot (/showthread.php?tid=11526)
[TG11] New Axiom old auto pilot - Ginodelg - 06-01-20 02:08 PM
I recently upgraded my chart plotter to Axiom but still have my last generation Ray Marine auto pilot. I can’t seem to get the two to interface.
RE: [TG11] New Axiom old auto pilot - Tom - Raymarine - Moderator - 06-11-20 12:02 AM
Hello Ginodelg,
Axiom displays cannot calibrate or control previous-generation autopilots, but can send waypoint data to them for Track mode and can receive heading data from them. How are the two connected? Have you checked to see whether you are receiving heading data, and whether if you do a Goto on the Axiom then you can engage Track on the pilot display? If you can do these then they are interfaced correctly.
Regards,
Tom