+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: C120 -- Resetting Log (/showthread.php?tid=1233)
C120 -- Resetting Log - Carey Cook - 06-23-16 03:54 PM
I have a new to me 2005 vessel with a C120 display with up-to-date software. I can reset the Trip Log daily (if I remember to do so). How do you reset the (other) (main) Log?
RE: C120 -- Resetting Log - Chuck - Raymarine - Moderator - 06-23-16 04:18 PM
Welcome to the Raymarine Forum Carey,
What device (instrument, DSM250/300/30, NMEA 0183 source, etc.) is supplying your system with speed through water data?
RE: C120 -- Resetting Log - Carey Cook - 06-26-16 01:35 PM
I have a DSM 250 sounder module with P65/P66 xducer.
RE: C120 -- Resetting Log - Chuck - Raymarine - Moderator - 06-27-16 09:37 AM
Carey,
In systems where a DSM30/300/250 w/fishinder transducer featuring a speed through water sensing component has been interfaced to the system, the Log data item may be reset by resetting the DSM (MENU->FISHFINDER SETUP->DSM RESET ) from a Fishfinder application page. After resetting the DSM, it will be necessary to configure the Select Transducer setting to match the model of transducer which has been interfaced to the DSM.