Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
C120 -- Resetting Log
06-23-16, 03:54 PM
Post: #1
C120 -- Resetting Log
I have a new to me 2005 vessel with a C120 display with up-to-date software. I can reset the Trip Log daily (if I remember to do so). How do you reset the (other) (main) Log?
Find all posts by this user
Quote this message in a reply
06-23-16, 04:18 PM
Post: #2
RE: C120 -- Resetting Log
Welcome to the Raymarine Forum Carey,

What device (instrument, DSM250/300/30, NMEA 0183 source, etc.) is supplying your system with speed through water data?
Visit this user's website Find all posts by this user
Quote this message in a reply
06-26-16, 01:35 PM (This post was last modified: 06-27-16 09:14 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: C120 -- Resetting Log
I have a DSM 250 sounder module with P65/P66 xducer.
Find all posts by this user
Quote this message in a reply
06-27-16, 09:37 AM
Post: #4
RE: C120 -- Resetting Log
Carey,

In systems where a DSM30/300/250 w/fishinder transducer featuring a speed through water sensing component has been interfaced to the system, the Log data item may be reset by resetting the DSM (MENU->FISHFINDER SETUP->DSM RESET ) from a Fishfinder application page. After resetting the DSM, it will be necessary to configure the Select Transducer setting to match the model of transducer which has been interfaced to the DSM.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)