+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Product Selection Assistance (/forumdisplay.php?fid=124)
+--- Thread: Cp370 (/showthread.php?tid=1738)
Cp370 - Kenmurgo - 08-28-16 12:35 PM
Is my c140w compatible with a new cp370 out of the box.
Thanks
RE: Cp370 - Chuck - Raymarine - Moderator - 08-29-16 05:02 PM
Welcome to the Raymarine Forum Ken,
As the Ethernet port of the C-Series Widescreen MFDs (SeaTalkhs) and CP370 (RayNet) differ, it would be necessary to create an Ethernet cable assembly having a SeaTalkhs (M) plug on one end and a RayNet (F) pug on the other end. Will the CP370 be used to replace a DSM30 / DSM300?
RE: Cp370 - Kenmurgo - 08-30-16 08:20 PM
Yes the cp370 will replace a dsm300. With the plug you mentioned it will work? Do I need to upgrade the software in the c140w I think it's running v2.35?
RE: Cp370 - Chuck - Raymarine - Moderator - 08-31-16 09:08 AM
Ken,
An A80160 SeaTalkhs (F) to RayNet (F) Adapter would be used to adapt the SeaTalkhs cable which had been interfaced to the DSM to instead be connected to the CP370. When replacing a DSM30/300 with a CP370, it is very important to replace the DSM's power cable with the power cable supplied with the CP370.