Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Cp370
08-28-16, 12:35 PM
Post: #1
Cp370
Is my c140w compatible with a new cp370 out of the box.
Thanks
Find all posts by this user
Quote this message in a reply
08-29-16, 05:02 PM
Post: #2
RE: Cp370
Welcome to the Raymarine Forum Ken,

As the Ethernet port of the C-Series Widescreen MFDs (SeaTalkhs) and CP370 (RayNet) differ, it would be necessary to create an Ethernet cable assembly having a SeaTalkhs (M) plug on one end and a RayNet (F) pug on the other end. Will the CP370 be used to replace a DSM30 / DSM300?
Visit this user's website Find all posts by this user
Quote this message in a reply
08-30-16, 08:20 PM (This post was last modified: 08-31-16 09:08 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: Cp370
Yes the cp370 will replace a dsm300. With the plug you mentioned it will work? Do I need to upgrade the software in the c140w I think it's running v2.35?
Find all posts by this user
Quote this message in a reply
08-31-16, 09:08 AM
Post: #4
RE: Cp370
Ken,

An A80160 SeaTalkhs (F) to RayNet (F) Adapter would be used to adapt the SeaTalkhs cable which had been interfaced to the DSM to instead be connected to the CP370. When replacing a DSM30/300 with a CP370, it is very important to replace the DSM's power cable with the power cable supplied with the CP370.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)