+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Product Selection Assistance (/forumdisplay.php?fid=124)
+--- Thread: ES 128 (/showthread.php?tid=2032)
ES 128 - [email protected] - 11-01-16 09:32 AM
Good day
I am looking to upgrade my plotter and like the new ES 128.
I have already purchased the evolution auto pilot and have AIS 650 which I am certain will connect to the ES 128.
Is my SR 100 going to be compatible with the ES 128?
I would also like to upgrade my sonar to the chirp down vision system is there a knot log combination sonar transducer available and if so what is the part #?
I will also be replacing my current radar with the Quantum system will my old E 80 display be able to be used as a second display at my chart table?
RE: ES 128 - Chuck - Raymarine - Moderator - 11-01-16 10:14 AM
Welcome to the Raymarine Forum captedl99,
Please click here to view a FAQ addressing how to replace an E-Series Classic MFD with an a/c/e/eS/gS-Series MFD.
Q1) Is my SR 100 going to be compatible with the ES 128?
A1) Yes.
Q2. I would also like to upgrade my sonar to the chirp down vision system is there a knot log combination sonar transducer available and if so what is the part #?
A2. Please click here to view a FAQ addressing this subject.
Q3) I will also be replacing my current radar with the Quantum system will my old E 80 display be able to be used as a second display at my chart table?
A3) Please click here to view a FAQ addressing this subject.