Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ES 128
11-01-16, 09:32 AM
Post: #1
ES 128
Good day

I am looking to upgrade my plotter and like the new ES 128.

I have already purchased the evolution auto pilot and have AIS 650 which I am certain will connect to the ES 128.

Is my SR 100 going to be compatible with the ES 128?

I would also like to upgrade my sonar to the chirp down vision system is there a knot log combination sonar transducer available and if so what is the part #?

I will also be replacing my current radar with the Quantum system will my old E 80 display be able to be used as a second display at my chart table?
Find all posts by this user
Quote this message in a reply
11-01-16, 10:14 AM (This post was last modified: 11-10-16 09:10 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: ES 128
Welcome to the Raymarine Forum captedl99,

Please click here to view a FAQ addressing how to replace an E-Series Classic MFD with an a/c/e/eS/gS-Series MFD.

Q1) Is my SR 100 going to be compatible with the ES 128?
A1) Yes.

Q2. I would also like to upgrade my sonar to the chirp down vision system is there a knot log combination sonar transducer available and if so what is the part #?
A2. Please click here to view a FAQ addressing this subject.

Q3) I will also be replacing my current radar with the Quantum system will my old E 80 display be able to be used as a second display at my chart table?
A3) Please click here to view a FAQ addressing this subject.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)