+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: ACU-200 Drain Wire (/showthread.php?tid=2236)
ACU-200 Drain Wire - DFMott - 12-13-16 01:12 AM
My boat's bonding system connects to the DC ground at a busbar that is located within 12" of where I am planning to mount the ACU-200. Would it be acceptable to connected the drain wire from the ACU-200 to the same terminal on the busbar where the bonding wire connects?
RE: ACU-200 Drain Wire - Chuck - Raymarine - Moderator - 12-14-16 09:17 AM
Welcome to the Raymarine Forum Don,
Should the heaving bonding cable be directly connected to the bus bar and the bus bar not also be used for grounding AC onboard the vessel, then a drain lead may be connected from the ACU to the bus bar.