+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: 13 Tooth Sprocket For Type 1 Rotary Drive (/showthread.php?tid=2982)
13 Tooth Sprocket For Type 1 Rotary Drive - baysailor34 - 04-28-17 10:06 PM
The shaft on the Type 1 Rotary Drive requires a sprocket with a 5/8" bore and a 1/8" key. The Raymarine sprocket part number is M81182. I can't find that sprocket anywhere. I searched online and found nothing. I called Defender and WM and neither have it available. Defender told me it's a part no longer made by Raymarine. I went to other sources of sprockets but all of them that are 5/8" bore have what is a "standard" 3/32 key slot for that size bore.
Can I use a sprocket with a 3/32 key to fit onto the shaft that has a 1/8" slot without encountering future problems?
Thanks,
Joe
RE: 13 Tooth Sprocket For Type 1 Rotary Drive - Chuck - Raymarine - Moderator - 05-02-17 02:09 PM
Welcome to the Raymarine Forum Joe,
As you have indicated the rotary drives are not supplied with sprockets and Raymarine does not offer a sprocket for its rotary drives. Those in need of sprockes for these rotary drives are generally referred to Edson Marine or to Grainger.