Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
13 Tooth Sprocket For Type 1 Rotary Drive
04-28-17, 10:06 PM
Post: #1
13 Tooth Sprocket For Type 1 Rotary Drive
The shaft on the Type 1 Rotary Drive requires a sprocket with a 5/8" bore and a 1/8" key. The Raymarine sprocket part number is M81182. I can't find that sprocket anywhere. I searched online and found nothing. I called Defender and WM and neither have it available. Defender told me it's a part no longer made by Raymarine. I went to other sources of sprockets but all of them that are 5/8" bore have what is a "standard" 3/32 key slot for that size bore.

Can I use a sprocket with a 3/32 key to fit onto the shaft that has a 1/8" slot without encountering future problems?

Thanks,
Joe
Find all posts by this user
Quote this message in a reply
05-02-17, 02:09 PM (This post was last modified: 05-02-17 02:10 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: 13 Tooth Sprocket For Type 1 Rotary Drive
Welcome to the Raymarine Forum Joe,

As you have indicated the rotary drives are not supplied with sprockets and Raymarine does not offer a sprocket for its rotary drives. Those in need of sprockes for these rotary drives are generally referred to Edson Marine or to Grainger.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)