+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: a67 MFD cannot read p319 transducer (/showthread.php?tid=3731)
a67 MFD cannot read p319 transducer - wimpel - 08-08-17 10:04 PM
My a67 does not show any transducer in Set Up. When connected it shows depth and fish chart for about 2 to 3 minutes then dies. Red wire steady at 9 V DC. Blue wire wildly fluctuating Voltage readings 0+ to 20+. when working - 0.0 on death. Unit has been returned last year and checked with an overboard transducer. Can I force it to read the transducer so I can adjust the settings ? Thanks.
RE: a67 MFD cannot read p319 transducer - Chuck - Raymarine - Moderator - 08-18-17 03:50 PM
Welcome to the Raymarine Forum wimpel,
On which cable's leads were you observing the specified voltages?