Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
a67 MFD cannot read p319 transducer
08-08-17, 10:04 PM
Post: #1
a67 MFD cannot read p319 transducer
My a67 does not show any transducer in Set Up. When connected it shows depth and fish chart for about 2 to 3 minutes then dies. Red wire steady at 9 V DC. Blue wire wildly fluctuating Voltage readings 0+ to 20+. when working - 0.0 on death. Unit has been returned last year and checked with an overboard transducer. Can I force it to read the transducer so I can adjust the settings ? Thanks.
Find all posts by this user
Quote this message in a reply
08-18-17, 03:50 PM
Post: #2
RE: a67 MFD cannot read p319 transducer
Welcome to the Raymarine Forum wimpel,

On which cable's leads were you observing the specified voltages?
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)