+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] Interfacing eS-128 to Existing NMEA 2K temp sensor (/showthread.php?tid=4537)
[CA] Interfacing eS-128 to Existing NMEA 2K temp sensor - trr - 01-10-18 04:20 PM
Hi , How do I display the temperature of an existing NMEA 2k Temp sensor on my eS-128 MFD. This happens to be an ambient air temp. I had an existing NMEA 2K network that is now connected to the eS-128. I see the temp sensor in the NMEA 2k diagnostics . I haven't been able to figure out how to display the temp on a either a chart as an overlay or elsewhere.
Thanks
RE: [CA] Interfacing eS-128 to Existing NMEA 2K temp sensor - Chuck - Raymarine - Moderator - 01-11-18 11:21 AM
Welcome to the Raymarine Forum trr,
Please click here to view a related FAQ addressing this subject. In this case you will simply add Air Temp (listed within the ENVIRONMENT data group) to the MFD's Databar, Data application panel(s), or Databox.