European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
Raymarine forum
/
Raymarine Forums
/
Multifunction Displays 
/
[CA] Interfacing eS-128 to Existing NMEA 2K temp sensor
/
[CA] Interfacing eS-128 to Existing NMEA 2K temp sensor
|
[CA] Interfacing eS-128 to Existing NMEA 2K temp sensor
|
|
01-10-18, 04:20 PM
(This post was last modified: 01-11-18 11:23 AM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
|
[CA] Interfacing eS-128 to Existing NMEA 2K temp sensor
Hi , How do I display the temperature of an existing NMEA 2k Temp sensor on my eS-128 MFD. This happens to be an ambient air temp. I had an existing NMEA 2K network that is now connected to the eS-128. I see the temp sensor in the NMEA 2k diagnostics . I haven't been able to figure out how to display the temp on a either a chart as an overlay or elsewhere.
Thanks |
|||
|
|
01-11-18, 11:21 AM
(This post was last modified: 01-11-18 11:23 AM by Chuck - Raymarine - Moderator.)
Post: #2
|
|||
|
|||
|
RE: [CA] Interfacing eS-128 to Existing NMEA 2K temp sensor
Welcome to the Raymarine Forum trr,
Please click here to view a related FAQ addressing this subject. In this case you will simply add Air Temp (listed within the ENVIRONMENT data group) to the MFD's Databar, Data application panel(s), or Databox. |
|||
|
|
|
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 2 Guest(s)