+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] E80 Depth Contours Won’t Display (/showthread.php?tid=4760)
[CA] E80 Depth Contours Won’t Display - tholley55 - 02-12-18 11:11 AM
Hi,
We’ve had this unit on our boat for 4 years and it’s worked fine. However, it recently stopped showing the depth contours. All other functions work correctly though. I’ve checked the settings such as chart setup, cartography setup etc and everything looks okay. Have also don a factory reset but the problem still persists. Any suggestions for resolving this would be much appreciated.
Thank you
RE: [CA] E80 Depth Contours Won’t Display - Chuck - Raymarine - Moderator - 02-12-18 05:25 PM
Welcome to the Raymarine Forum tholley55,
Please click here to view a FAQ addressing this subject.
RE: [CA] E80 Depth Contours Won’t Display - tholley55 - 02-13-18 10:22 PM
Thanks Chuck, I’ll give these suggestions a try.
RE: [CA] E80 Depth Contours Won’t Display - Chuck - Raymarine - Moderator - 02-14-18 11:08 AM
You're welcome.