Raymarine forum
[CA] Requirements for adding RMK-10 to Axiom 9 - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] Requirements for adding RMK-10 to Axiom 9 (/showthread.php?tid=4783)



[CA] Requirements for adding RMK-10 to Axiom 9 - Md2002 - 02-15-18 11:27 AM

If I purchase a RMK-10 remote will it attach directly to my Axiom 9, or do I need additional cables or parts?


RE: [CA] Requirements for adding RMK-10 to Axiom 9 - Chuck - Raymarine - Moderator - 02-15-18 12:06 PM

Welcome to the Raymarine Forum Md2002,

The RMK-10 will be interfaced to a 12VDC switched power circuit using the supplied power cable. The RMK-10 will be interfaced the MFD via an appropriate length of RayNet (F) to RayNet (F) Cable to be separately purchased. It is recommended that MFDs be maintained with the latest available Raymarine product software update when interfacing with a RMK-9 or RMK-10.