Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] Requirements for adding RMK-10 to Axiom 9

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Requirements for adding RMK-10 to Axiom 9
02-15-18, 11:27 AM (This post was last modified: 02-15-18 12:02 PM by Chuck - Raymarine - Moderator.)
Post: #1
Md2002 Offline
Junior Member
**
 		Posts: 1
Joined: Feb 2018
Reputation: 0
[CA] Requirements for adding RMK-10 to Axiom 9
If I purchase a RMK-10 remote will it attach directly to my Axiom 9, or do I need additional cables or parts?
Find all posts by this user
Quote this message in a reply
02-15-18, 12:06 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] Requirements for adding RMK-10 to Axiom 9
Welcome to the Raymarine Forum Md2002,

The RMK-10 will be interfaced to a 12VDC switched power circuit using the supplied power cable. The RMK-10 will be interfaced the MFD via an appropriate length of RayNet (F) to RayNet (F) Cable to be separately purchased. It is recommended that MFDs be maintained with the latest available Raymarine product software update when interfacing with a RMK-9 or RMK-10.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication