+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Instruments (/forumdisplay.php?fid=117)
+--- Thread: [CA] T-120 Racemaster compatibility (/showthread.php?tid=4937)
[CA] T-120 Racemaster compatibility - Wharf Rat - 03-07-18 07:34 PM
I am currently using the Racemaster on a micronet system with depth and speed.
Can I connect a T-120 to the micronet system and use the Racemaster as the display? If so what info can I display? and can you do a split screen with wind speed and boat speed ?
Also can I import my micronet information into INavX?
Thanks!
RE: [CA] T-120 Racemaster compatibility - Chuck - Raymarine - Moderator - 03-08-18 01:52 PM
Welcome to the Raymarine Forum Wharf Rat,
In order to use add the T-120 to the system, it would additionally be necessary for the system to include one of the following:
- T113 Multifunctional Wireless Remote Display
- T110 Multifunction Wireless Display
- T111 Multifunction Wireless Dual Display
- T112 Multifunction Wireless Analogue Display
TackTick products communicate via proprietary wireless communications. Should one desire to bridge data from the system to Wi-Fi for use by a computer or mobile device based app, then one of the following approaches would typically be required:
- Interface a MicroTalk gateway to a simple powered and properly terminated SeaTalkng / NMEA 2000 backbone. Then interface a third party NMEA 2000 to Wi-Fi data bridge to the SeaTalkng / NMEA 2000 backbone.
- Add a T122 Wireless NMEA Interface to the system. Then interface a third party NMEA 0183 to Wi-Fi data bridge to the T122 Wireless NMEA Interface.