Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] T-120 Racemaster compatibility
03-07-18, 07:34 PM (This post was last modified: 03-08-18 10:15 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] T-120 Racemaster compatibility
I am currently using the Racemaster on a micronet system with depth and speed.
Can I connect a T-120 to the micronet system and use the Racemaster as the display? If so what info can I display? and can you do a split screen with wind speed and boat speed ?
Also can I import my micronet information into INavX?
Find all posts by this user
Quote this message in a reply
03-08-18, 01:52 PM
Post: #2
RE: [CA] T-120 Racemaster compatibility
Welcome to the Raymarine Forum Wharf Rat,

In order to use add the T-120 to the system, it would additionally be necessary for the system to include one of the following:
- T113 Multifunctional Wireless Remote Display
- T110 Multifunction Wireless Display
- T111 Multifunction Wireless Dual Display
- T112 Multifunction Wireless Analogue Display

TackTick products communicate via proprietary wireless communications. Should one desire to bridge data from the system to Wi-Fi for use by a computer or mobile device based app, then one of the following approaches would typically be required:
- Interface a MicroTalk gateway to a simple powered and properly terminated SeaTalkng / NMEA 2000 backbone. Then interface a third party NMEA 2000 to Wi-Fi data bridge to the SeaTalkng / NMEA 2000 backbone.
- Add a T122 Wireless NMEA Interface to the system. Then interface a third party NMEA 0183 to Wi-Fi data bridge to the T122 Wireless NMEA Interface.
Find all posts by this user
Quote this message in a reply
Post Reply 

Forum Jump:

User(s) browsing this thread: 1 Guest(s)